Finished wallet measurements : 7 3/4″ x 4 1/4″ (when closed)
Download the pattern here : https://bit.ly/3JRGC2G
NOTE : If you opt for wristlet strap, please install your d-ring tab the opposite side (from where I did mine), pay attention to what I explained at 21:21 or refer to the instruction in the pattern.
Supplies (design 1)
Fabric 1 : 1/2 yard of cotton quilting fabric
Fabric 2: 1/4 yard of cotton quilting fabric
1/3 yard ultra light weight interfacing; I use Pellon PLF 36 (15“ wide) https://tidd.ly/3BPWzDF
11” x 7 1/2“ (28 x 19 cm) mid-heavy weight fusible interfacing; such as decovil light https://tidd.ly/3M17tv2 (what I use in this project),
pellon 809 (decor bond), or pellon 808 (craft fuse)
6” (teeth length) metal zipper https://amzn.to/3IouxBB
1 set of button snap closure 12.5mm https://amzn.to/3JR3Wxl
1/8“ or 1/4” basting tape https://amzn.to/3BPXtjx
*if opt ID slot
5” x 4 1/2” (12.7 x 11.4 cm) clear vinyl (I use gauge 8 vinyl) https://amzn.to/36lXkoA
*if opt for wristlet strap
1/2“ (12mm) inner measurement d-ring
1/2” (12mm) inner measurement swivel hook https://amzn.to/3CJ2GcJ
1/2” (12mm) wide cotton twill tape 2” (5cm) long https://amzn.to/3BPQ0Rr
*if opt for RFID blocking fabric
8 1/2” x 8 3/4” (21.6 x 22.3cm) RFID blocking fabric https://tidd.ly/3ka0GC2 – if no ID slot
8 1/2” x 12 1/2” (21.6 x 31.7) RFID blocking fabric – if opt for ID slot
Tools
Basic sewing notions
Zipper foot
Walking foot
Leather hole puncher
Link to wristlet strap : https://youtu.be/bPN57n3eEE4?t=1088
Visit my Amazon Store for recommended supplies, tools, and notions : https://www.amazon.com/shop/yoansewingstudio
Note : Some of the links above are affiliate links; I may earn commission when you make a purchase of qualifying items
through any of those links with no additional charge.
Link to wristlet strap : https://youtu.be/bPN57n3eEE4?t=1088
Subscribe to this channel : https://bit.ly/3h5oWl5
Note : Some of the links above are affiliate links; I may earn commission when you make a purchase of qualifying items
through any of those links with no additional charge. Thank you for your support!
Fabric Information :
For the Design 1, I use the Woodland Notions collection by Nina Ruby from Dashwood Studios UK.
For the Design 2, I use mix and match fabric scraps (wallet exterior), combination from Moda, Maywood and Craftsy; for the wallet interior I use fabric from Art Gallery Fabric.
Find me on another platforms
Instagram : https://www.instagram.com/yoansewingstudio/
Facebook :https://www.face.cx/yoansewingstudio/
Pinterest : https://www.pinterest.com/yoansewingstudio
Website : https://www.yoansewingstudio.com
Join my email list : http://eepurl.com/gQ_3wT
If you wish to share what you make : #yoansewingstudio / tag me on Instagram, or post directly on my Facebook page.
Time Stamps
Intro 0:00
Preparing the fabric 1:03
Card Pocket (panel 1) 1:07
Applying interfacing on panel 1 1:25
Folding and pressing the card pocket panel 1:38
Trimming the card pocket 3:23
Sewing the side panels (panel 2) 3:52
Attaching the lining/binding the card pockets 4:31
Sewing the slip pocket 5:41
Assembling lower wallet interior 6:01
Sewing the ID pocket 6:48
Attaching the ID pocket to panel 10 9:57
Assembling the wallet interior 11:08
Preparing the exterior panels 11:36
Applying the interfacing 11:47
Preparing the zipper 12:33
Sewing the zipper tabs 13:01
Sewing the zipper pocket13:32
Trimming the bottom of wallet exterior 15:01
Attaching the male button 15:13
Assembling the wallet 15:34
Final pressing/topstitching 16:56
Attaching the female button 18:08
Design 2 – Panel A 18:39
Design 2 – Panel B 19.05
Adding RFID blocking fabric19:57
Adding wristlet strap 20:45
Closing 22:27